Regular price
€11,11
VAT excluded
€11,11
VAT excluded
Payment methods
Product Description
TOP line water-based cleaner
Cleans and degreases all surfaces
Features
HP CLEAN has a strong penetrating effect that lifts dirt. An anti-corrosion additive reduces the risk of rust, which is typical of most water-based cleaners.
- For natural dirt
- Complies with HACCP regulations
- Solvent and acid-free, safe on all materials
- Easily removes bad odors and natural residues
- Skin-safe, fully biodegradable
Safe to use on the following materials
- Natural stone: walls, floors, fireplaces, granite thresholds, marble, slate, white limestone, calcareous stones, etc.
- Construction: exterior walls, plastics, canopies, terraces, paving, etc.
- Plastics: doors, roller shutters, yachts, campers, garden furniture, hemp tarpaulins, pool covers, canopies and plastic noses, frames, lockers, etc.
- Wood: garden screens, garden furniture, stands, pergolas, hardwood, etc.
- Coated and uncoated materials: engines, machinery, engine blocks, frames, gates, etc. without damaging rubbers and seals
- Textiles: floor coverings, carpets, car mats, sofas, etc.
- Other: ceramics, tiles, animal kennels, etc.
Applications
- Cleaning of all surfaces: walls, floors, plastics, stone, wood, etc.
- Cleaning of all vehicles (inside and outside): cars, motorcycles, caravans, boats, etc.
- Cleaning of heavily soiled fabrics
- Solvent-free degreaser, ideal before bonding, sealing, welding, coating, etc.
How to use
For cleaning and degreasing normal dirt:
- Apply HP CLEAN to the dirt (always from bottom to top)
- Scrub, rinse with water and dry
For cleaning and degreasing heavy dirt:
- Apply HP CLEAN to the surface and let it act for about 5 minutes depending on the condition of the dirt to be removed
- When applied to vertical surfaces, it is recommended to apply from bottom to top
- In case of stubborn dirt on porous surfaces, scrub with a medium stiffness brush
- Rinse with clean water; repeat the operation if necessary
For deep cleaning (e.g. oil on concrete):
- Spray TEC7 CLEANER on the oil stain and let it act for at least 5 minutes
- Lightly scrub with a medium stiffness brush and spray TEC7 CLEANER on the stain again
- Let it act for at least 5 minutes
- Apply a generous amount of HP CLEAN to the stain and let it act for at least 5 minutes
- Lightly scrub with a medium stiffness brush
- Apply HP CLEAN to the stain again and let it act
- Remove all dirty soap residues with clean water using a hose or, even better, a high-pressure washer
- Repeat the operation if necessary
For finishing sealant joints:
- Spray HP CLEAN on the fresh, uncatalyzed sealant joint
- Spray a little HP CLEAN on your finger or a spatula
- Shape the sealant joint to give it the desired form
- Once the sealant has dried, rinse with clean water. This operation is ideal if the joint needs to be painted
