Product Description
| Base | MS Polymer |
| Physical state | Hard thixotropic paste |
| Specific weight | 1.49 g/cm³ |
| Skin formation | 3–5 min (23 °C / 50% RH) |
| Full catalysis time | 24 h = 2.7 mm / 48 h = 4 mm |
| E-modulus 100% | 1.0 N/mm² (DIN 53504) |
| Shore A hardness | 54 Shore A (23 °C / 50% RH) |
| Tensile strength | 22.5 kg/cm² (DIN 53504 S2) |
| Elongation at break | > 500% |
| Initial membership | 600 kg/m² – no fixing required |
| Maximum application thickness | Up to 40 mm (without sagging) |
| Application temperature | +5 °C / +40 °C |
| Thermal resistance | –40 °C / +90 °C |
| Shrinkage after catalysis | ≈ 5% (DIN 52451) |
| Water resistance | Perfect – waterproof |
| Chemical resistance | Good: water, oils, aliphatic solvents, dilute acids / Moderate: ketones, esters / Poor: concentrated acids |
| Resistance to fungi and bacteria | Excellent |
| Conservation | 15 months (in original unopened packaging) |
| Certifications | Food grade – free from solvents, phthalates and isocyanates |
| Packaging | 290ml cartridge |
| Colors | White (Cod. 534525) / Grey (Cod. 534535) |
X-TACK® is the professional structural adhesive with immediate setting and suction effect , designed to guarantee extreme adhesion on almost all building materials, even on wet or vertical surfaces .
Thanks to the high-strength MS Polymer technology, it offers an initial hold of 600 kg/m² , eliminating the need for clamps or fixing systems.
Its advanced formulation, free from solvents, phthalates and isocyanates , makes it safe for food use , resistant to fungi and bacteria , and suitable for indoor and outdoor environments.
Perfectly stable up to thicknesses of 40 mm, X-TACK® maintains permanent elasticity and long-lasting adhesion even under conditions of vibration or shock.
It is the ideal choice for construction professionals, installers, window and door fitters, craftsmen and maintenance workers who need an immediate, powerful and clean adhesive , capable of replacing screws, nails and mechanical anchors.
How to Use
Preparation:
-
Clean and degrease the surface thoroughly with TEC7 CLEANER or MULTICLEAN .
-
Check material compatibility (preliminary tests recommended on plastics, paints or exotic woods).
Application:
-
Use GUN7 or MULTIGUN gun to extrude the product.
-
Apply continuous vertical lines , without cutting the nozzle (equipped with a V-shaped groove).
-
Recommended thickness: 3 mm (min. 2 mm).
-
Press the surfaces to be glued firmly to activate the suction effect.
-
The bond will be stable in a few seconds , with full setting in 24 hours .
Technical tip:
Apply in continuous strips rather than dots for maximum adhesion and structural strength.
Applications
X-TACK® is ideal for structural, vertical and high-strength bonding in the construction, industrial and craft sectors, even in difficult conditions:
-
Wall coverings and panels: concrete, brick, plaster, gypsum, drywall.
-
Windows and doors: doors, windows, sills, profiles and frames.
-
Bathrooms and kitchens: shower cubicles, sinks, mirrors, and marble or stoneware surfaces.
-
Building materials: wood, metal, ceramic, stainless steel, aluminum, PVC, natural stone, granite, glass.
-
Roofing and cladding: sheet metal, copper, pre-painted aluminum, sandwich panels, metal structures.
Perfect for bonding where drilling is not possible or where immediate hold is required, even in humid or wet environments .
