TOP line water-based cleaner
Cleans and degreases all surfaces

Characteristics

HP CLEAN has a highly penetrating effect that lifts dirt. An anti-corrosion additive reduces the risk of rust, which is typical of most water-based cleaners.

For dirt of natural origin
Compliant with HACCP regulations
Solvent and acid free, safe on all materials
Easily removes bad odors and natural residues
Safe on the skin, completely biodegradable

Safe use on the following materials

Natural stone: walls, floors, fireplaces, thresholds in granite, marble, slate, white limestone, calcareous stones, etc.
Construction: external walls, models, canopies, terraces, floors, etc.
Plastics: doors, shutters, yachts, campers, garden furniture, hemp tarpaulins, swimming pool covers, canopies and models for muzzles, frames, lockers, etc.
Wood: garden screens, garden furniture, terraces, pergolas, hardwood, etc.
Materials covered and not: engines, machinery, engine blocks, chassis, gates, etc. without damaging rubbers and gaskets
Textiles: floor covers, carpets, car mats, sofas, etc.
Other: ceramics, tiles, tiles, pet houses, etc.

Applications

Cleaning of all surfaces: walls, floors, plastics, stone, wood, etc.
Cleaning of all vehicles (interior and exterior): cars, motorcycles, caravans, boats, etc.
Cleaning heavily soiled fabrics
Solvent-free degreaser ideal before gluing, sealing, welding, coating, etc.

How to use

For cleaning and degreasing normal dirt:

Apply HP CLEAN over the dirt (always from bottom to top)
Rub, rinse with water and dry

For cleaning and degreasing heavy dirt:

Apply HP CLEAN on the surface and leave it to act for about 5 minutes depending on the condition of the dirt to be removed
When applied to vertical surfaces, it is recommended to apply from the bottom up
For stubborn dirt on porous surfaces, scrub with a medium stiff brush
Rinse with clean water; repeat the operation if necessary

For deep cleaning of dirt (e.g. oil on concrete):

Spray TEC7 CLEANER on the oil stain and leave it to act for at least 5 minutes
Scrub lightly with a medium stiff brush and spray TEC7 CLEANER again on the stain
Leave to act for at least 5 minutes
Apply a generous dose of HP CLEAN on the stain and leave to act for at least 5 minutes
Scrub lightly with a medium stiff brush
Apply HP CLEAN again to the stain and leave it to act
Remove all dirty soap residues with clean water using a hose or even better a high pressure cleaner
If necessary, repeat the operation

For finishing sealing joints:

Spray HP CLEAN on the joint with still fresh and uncured sealant
Spray a little HP CLEAN also on your finger or on a spatula
Mold the sealing joint to the desired shape
Once the sealant has dried, rinse with clean water. This operation is ideal if the joint needs to be painted

Language

Hp Clean® - 1 Lt

How to use