Immersion silicone sealant Tec7 adhesive

Characteristics

TEC7 is able to glue and seal underwater; replaces all assembly and similar glues for gluing with wood , polyurethane-based glues, silicones, sanitary silicones, acrylic sealants, butyl rubber-based sealants.
As an immersion sealing adhesive universal, TEC7 adheres to most surfaces and does not attack synthetic materials.
Ideal for mirrors (vertical adhesion), natural stone (does not impregnate or stain), metal, polyester , polystyrene foam, damp surfaces, even underwater.
For sealing steel, welded and also bonded steel (also for type 316 and 316L stainless steel), preventing rust formation
Paintable sealant with most common paints
Enamels based on alkyd resin, applied over TEC7, can dry more slowly
TEC7 has lower adhesion on PP, PE, bitumen and silicones.

How to use

Application temperature: from +5°C to +40°C • Apply on clean surfaces, free from dust and grease
If necessary, clean the surface with TEC7 CLEANER or MULTICLEAN
Apply with the special gun for GUN7 sealants
Given the large variety of different types and compositions of plastic materials, as well as materials that are prone to stress cracking, preliminary testing is recommended
Test adhesion on plastics, dust layers, exotic woods and bituminous materials. • Cut the end of the cartridge
Cut the spout to the desired size
Seen from the large variety of different types of paints and varnishes on the market, it is recommended to carry out preliminary tests. Using alkyd resin home products can slow down the drying process
Use TEC7 CLEANER to clean and degrease safely, to achieve a perfect finish and to remove uncured TEC7 polymers. Use HP CLEAN for finishing on porous materials
When gluing mirrors in bathrooms, apply only vertical strips of adhesive, to avoid stagnant humidity which can result from condensation
Ideal thickness for optimal adhesion: 3 mm

Language

Tec7® Silicone sealant in immersion