Collection tank for 2 x 200 LT drums - RAL 5010
Collection tank for 2 x 200 LT drums - RAL 5010
Product Description
| ART. | A | B | C | D | E | Capacity |
| SVR2F | 1380 | 850 | 230 | 100 | 330 | 2 200 Lt drums |
A=Length
B=Width
C=Useful height
D=Foot height
E=Total height
The measurements are expressed in millimeters
General information
Designed to ensure maximum safety in the storage of two 200-litre drums , the Mayermoover collection tank in RAL 5010 (gentian blue) version represents a reliable technical solution, compliant with European regulations on environmental protection and safety in the workplace.
Thanks to the sturdy steel construction and epoxy powder coating, this container ensures durability, resistance and visibility , even in environments subject to mechanical stress or in contact with chemical substances.
Tested structure and certified performance
Constructed from 3mm (30/10) thick carbon steel , each tank is solidly constructed and electronically tested to ensure no leaks or seepage. The included hot-dip galvanized grating provides a stable and durable support surface for the two 200-litre drums.
The materials used come from suppliers qualified according to UNI EN ISO 9001 , with production compliant with UNI parameters and the possibility of document traceability upon request.
Technical features
-
Capacity: 2 x 200 litre drums
-
Frame: S235JR or higher carbon steel
-
Thickness: 3 mm
-
Finish: RAL 5010 epoxy powder coating
-
Grating included: hot-dip galvanized, pressed
-
Welds electronically tested for watertightness
-
Handling: prepared for forklift forks
-
Product compliant with UNI standards
-
Material certifications available upon request
Customizations available
Upon request, the tub can be made with:
-
Single or two-component liquid painting
-
Cold galvanizing or hot galvanizing
-
Finishes in other RAL colors (quantities to be agreed)
Recommended areas of use
-
Storage areas for oils, solvents and chemicals
-
Industrial warehouses with separate management of drums
-
Workshops, laboratories, waste treatment plants
-
Environments where regulatory compliant spill protection is required
Storage and Retention Guide
What does the law say?
According to Legislative Decree 19/05/1999 n. 152 , amended by Legislative Decree 2000 n. 258 , containment basins must have a minimum capacity at least equal to the largest of the stored containers and in any case not less than 1/3 of the total volume of the hazardous substances present. In areas subject to groundwater protection, the legislation instead requires that the entire stored volume be contained within the collection tank ( 100% of the volume ).
⚠️ Attention:
This regulation does not apply to the storage of used oil , for which the law expressly requires a containment tank equal to 100% of the stored volume , regardless of other considerations.
To better clarify the practical application of these rules, we report below two examples with explanatory data:
| Parameter | Example 1 | Example 2 |
|---|---|---|
| Total substances stored | 1500 liters | 3600 liters |
| 1/3 of the total | 500 liters | 1200 liters |
| Larger container | 700 liters | 1000 liters |
| Minimum capacity required | 700 liters (being 700 > 500) |
1200 liters (being 1000 < 1200) |
