Cabinet with tempered glass doors - 4/8 movable shelves - rounded edges

L=Width
P=Depth
H=Height
The measurements are expressed in millimetres

General information

These office cabinets are characterized by maximum functionality.

• Steel sheet painted with scratch-resistant epoxy powders.
• Rounded edges.
• Shelves and tops designed for the application of suspended folders at 330 mm centre distance.
• Available colours: Grey (RAL 7035), Anthracite (RAL 7016), Sand (RAL 1013), White (RAL 9003) and Black (RAL 9005).
• Further colors in addition to those selectable and available only on request .

Made of DCO1 steel sheet (formerly FeP01, ref. EN 10130 91 + A1-98 standards) with thicknesses of 8 tenths, with assembly details in 15 tenths.
The sides of the cabinets, with a rounded front external edge with a radius of 6mm, are fixed to the base using 4+4 metal hooks stamped in 15/10 sheet metal, the top is fixed to the sides using 4 8MA threaded bolts.
The backs are fixed to the cabinet structure with self-tapping screws, to ensure maximum rigidity.

The 120 cm wide, 200 cm high wardrobes have a single compartment with 4 adjustable shelves on a 25 mm pitch rack, the wider wardrobes have two compartments divided by a partition, with 4+4 adjustable shelves.

They feature sliding doors with tempered glass, with ball bearings on special metal rails, recessed handles and Yale-type lock.

The anti-scratch epoxy powder coating is carried out after a microphosphating process with passivating neutralization. Drying takes place in a thermal tunnel with heat progression (180°) and at a controlled temperature.

The metal cabinets have been designed and tested according to the following UNI standards:
UNI 8596/84 Stability
UNI 8597/84 Structural resistance
UNI 8601/84 Bending of planes
UNI 8603/84 Resistance of the floor supports
UNI 8602/84 Opening and closing of doors with impact
UNI 8600/84 Bending with concentrated load
UNI 8607/84 Durability of doors
UNI 8606/84 Maximum total load

Finishing tests:
UNI ISO9227/93 Corrosion resistance
UNI 9427/89 Resistance to light
UNI 8901/86 Impact resistance
UNI 115/87 Taber abrasion
UNI 9428/89 Scratch resistance
EN 12720/97 Resistance to cold liquids (stains)
EN 12721/97 Resistance to moist heat
EN 12722/97 Resistance to dry heat
EN ISO 1520/95 Static drawing
UNI 9240/87 Adhesion of finishes to the substrate

Tempered glass:
UNI 121501-1/01 Fragmentation test

Instruction manual

We ship all over Italy! To find out the shipping costs, just add the goods to the cart and at checkout you will be able to see the amount calculated based on the destination city.

- Visa, Mastercard, Maestro and American Express credit/debit card

- Rechargeable credit cards

- Bank transfer and Ri.Ba.

- Klarna in 3 convenient interest-free instalments

For sales assistance write to us on our chat active 24/7 or call +39 0423 078748