Regular price
€43,56
VAT excluded
€53,14
VAT included
Payment methods
Product Description
TOP line water-based cleaner
Cleans and degreases all surfaces
Characteristics
HP CLEAN has a highly penetrating effect that lifts dirt. An anti-corrosion additive reduces the risk of rust, which is typical of most water-based cleaners.
- For dirt of natural origin
- Compliant with HACCP regulations
- Solvent and acid free, safe on all materials
- Easily removes bad odors and natural residues
- Safe on the skin, completely biodegradable
Safe use on the following materials
- Natural stone: walls, floors, fireplaces, thresholds in granite, marble, slate, white limestone, calcareous stones, etc.
- Construction: external walls, models, canopies, terraces, floors, etc.
- Plastics: doors, shutters, yachts, campers, garden furniture, hemp tarpaulins, swimming pool covers, canopies and models for muzzles, frames, lockers, etc.
- Wood: garden screens, garden furniture, terraces, pergolas, hardwood, etc.
- Materials covered and not: engines, machinery, engine blocks, chassis, gates, etc. without damaging rubbers and gaskets
- Textiles: floor covers, carpets, car mats, sofas, etc.
- Other: ceramics, tiles, tiles, pet houses, etc.
Applications
- Cleaning of all surfaces: walls, floors, plastics, stone, wood, etc.
- Cleaning of all vehicles (interior and exterior): cars, motorcycles, caravans, boats, etc.
- Cleaning heavily soiled fabrics
- Solvent-free degreaser ideal before gluing, sealing, welding, coating, etc.
How to use
For cleaning and degreasing normal dirt:
- Apply HP CLEAN over the dirt (always from bottom to top)
- Rub, rinse with water and dry
For cleaning and degreasing heavy dirt:
- Apply HP CLEAN on the surface and leave it to act for about 5 minutes depending on the condition of the dirt to be removed
- When applied to vertical surfaces, it is recommended to apply from the bottom up
- For stubborn dirt on porous surfaces, scrub with a medium stiff brush
- Rinse with clean water; repeat the operation if necessary
For deep cleaning of dirt (e.g. oil on concrete):
- Spray TEC7 CLEANER on the oil stain and leave it to act for at least 5 minutes
- Scrub lightly with a medium stiff brush and spray TEC7 CLEANER again on the stain
- Leave to act for at least 5 minutes
- Apply a generous dose of HP CLEAN on the stain and leave to act for at least 5 minutes
- Scrub lightly with a medium stiff brush
- Apply HP CLEAN again to the stain and leave it to act
- Remove all dirty soap residues with clean water using a hose or even better a high pressure cleaner
- If necessary, repeat the operation
For finishing sealing joints:
- Spray HP CLEAN on the joint with still fresh and uncured sealant
- Spray a little HP CLEAN also on your finger or on a spatula
- Mold the sealing joint to the desired shape
- Once the sealant has dried, rinse with clean water. This operation is ideal if the joint needs to be painted
