Hp Clean® - 25 Lt

TOP line water-based cleaner
Cleans and degreases all surfaces

Characteristics

HP CLEAN has a highly penetrating effect that lifts dirt. An anti-corrosion additive reduces the risk of rust, which is typical of most water-based cleaners.

• For dirt of natural origin
• Compliant with HACCP regulations
• Solvent and acid free, safe on all materials
• Easily removes bad odors and natural residues
• Safe on the skin, completely biodegradable

Safe use on the following materials

• Natural stone: walls, floors, fireplaces, thresholds in granite, marble, slate, white limestone, calcareous stones, etc.
• Construction: external walls, models, canopies, terraces, floors, etc.
• Plastics: doors, shutters, yachts, campers, garden furniture, hemp tarpaulins, swimming pool covers, canopies and models for muzzles, frames, lockers, etc.
• Wood: garden screens, garden furniture, terraces, pergolas, hardwood, etc.
• Materials covered and not: engines, machinery, engine blocks, chassis, gates, etc. without damaging rubbers and gaskets
• Textiles: floor covers, carpets, car mats, sofas, etc.
• Other: ceramics, tiles, tiles, pet houses, etc.

Applications

• Cleaning of all surfaces: walls, floors, plastics, stone, wood, etc.
• Cleaning of all vehicles (interior and exterior): cars, motorcycles, caravans, boats, etc.
• Cleaning heavily soiled fabrics
• Solvent-free degreaser ideal before gluing, sealing, welding, coating, etc.

How to use

For cleaning and degreasing normal dirt:

• Apply HP CLEAN over the dirt (always from bottom to top)
• Rub, rinse with water and dry

For cleaning and degreasing heavy dirt:

• Apply HP CLEAN on the surface and leave it to act for about 5 minutes depending on the condition of the dirt to be removed
• When applied to vertical surfaces, it is recommended to apply from the bottom up
• For stubborn dirt on porous surfaces, scrub with a medium stiff brush
• Rinse with clean water; repeat the operation if necessary

For deep cleaning of dirt (e.g. oil on concrete):

• Spray TEC7 CLEANER on the oil stain and leave it to act for at least 5 minutes
• Scrub lightly with a medium stiff brush and spray TEC7 CLEANER again on the stain
• Leave to act for at least 5 minutes
• Apply a generous dose of HP CLEAN on the stain and leave to act for at least 5 minutes
• Scrub lightly with a medium stiff brush
• Apply HP CLEAN again to the stain and leave it to act
• Remove all dirty soap residues with clean water using a hose or even better a high pressure cleaner
• If necessary, repeat the operation

For finishing sealing joints:

• Spray HP CLEAN on the joint with still fresh and uncured sealant
• Spray a little HP CLEAN also on your finger or on a spatula
• Mold the sealing joint to the desired shape
• Once the sealant has dried, rinse with clean water. This operation is ideal if the joint needs to be painted

We ship all over Italy! To find out the shipping costs, just add the goods to the cart and at checkout you will be able to see the amount calculated based on the destination city.

- Visa, Mastercard, Maestro and American Express credit/debit card

- Rechargeable credit cards

- Bank transfer and Ri.Ba.

- Klarna in 3 convenient interest-free instalments

For sales assistance write to us on our chat active 24/7 or call +39 0423 078748