Collection: Immersion heaters

The over-the-side model is designed for open vessels and is mounted over the rim. The IBC model has a dedicated geometry for insertion into the container and an external digital controller. The magnetic submersible heater is positioned on the bottom of a compatible tank and is primarily intended for temperature maintenance of oil and permitted fluids. Tank access, depth and material determine whether installation is possible.

No. The range uses AISI 304 for magnetic submersible heaters and AISI 316L for the over-the-side and IBC models. Selection requires checking the fluid, concentration, temperature and process conditions. Surface power density is also relevant for heat-sensitive products. The steel’s corrosion resistance does not imply universal compatibility or certification for food contact.

It depends on the model. The 2000 W IBC heater requires a minimum liquid level of 500 mm. Magnetic submersible heaters must remain at least 3 cm below the fluid surface. These values are not interchangeable: for the over-the-side heater and every other configuration, the depth specified in the relevant manual must be observed to prevent the heating element from running dry.